A place for things that don't fit into the automotive world

STM32F103CBT7 problem

  • Jamesonlin
  • Jamesonlin's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 2 months ago - 4 years 2 months ago #55225 by Jamesonlin
STM32F103CBT7 problem was created by Jamesonlin
I'm using an STM32F103CBT7 with HAL functionality and a 72MHz system clock in my design.
SPI 1 is set to Master, with a data rate of 18 MBits/s and a 16-bit data width.
When sending data out, the MOSI pin has a data bit, but the SCK pin has no clock pulse.
I'm at a loss as to what's going on.
Is there anything you can recommend?
Last edit: 4 years 2 months ago by Jamesonlin.

Please Log in or Create an account to join the conversation.

  • Chad
  • Chad's Avatar
  • Offline
  • Moderator
  • Moderator
  • I am not a parts changer.
More
4 years 2 months ago #55228 by Chad
Replied by Chad on topic STM32F103CBT7 problem
Your question is a bit beyond the scope of this forum. Here is a link to a CAN bus group, on FB, where you can probably find the help that you are looking for.

www.facebook.com/groups/1205491719519020
"Knowledge is a weapon. Arm yourself, well, before going to do battle."
"Understanding a question is half an answer."
I have learned more by being wrong, than I have by being right. :-)
The following user(s) said Thank You: Noah

Please Log in or Create an account to join the conversation.

Time to create page: 0.348 seconds