Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
2019 Ford Edge 2.0L.
vehicle came in no start and no communication with any module. Testing at the actual Gate way Module DLC pins 6&14 I had 450K ohms with battery disconnected.
Found connector C238 loose in passenger foot well due to connector being broken.
My question is with this vehicle operating properly I only have 120 OHMS at 6&14 and NO WAVEFORM at all. Voltage is zero on 6&14 with vehicle running.
Is this how these function normally? Seems counterintuitive to normal HIGH SPEED CAN testing.
Appreciate any information. Thanks
Topic Author
