Read/Leave Feedback
Welcome to the feedback page where you can post feedback and read feedback about ScannerDanners book and ScannerDanner Premium.
I'm a 72 year old retired heavy equipment mechanic and was an aircraft electrician in the Marine Corps during the Vietnam War. I was always the electrical "go to guy." -- Learning a great deal about the newer cars and how to troubleshoot and repair them. Thanks Paul, Keep up the good work. This old Dog is learning a great deal from you !!!!
ive been avoiding this whole pcm controlled thing for a long time,,but ive watched several vids,,and learned quite a bit..
This is the best training any auto tech needs. Pros.and amateur alike. God Bless you and family Danner have your self A Happy And Merry Christmas And a Happy new Year.Stay Safe.
My subscription has expired. However when seeking to re-subscribe an Error Message states that I'm already a subscriber & that I can't subscribe twice.
Please advise.
SCANNERDANNERS REPLY:
Please email support@scannerdanner.com we can absolutely help you! This is a feedback page only. Thank you!
Stephen
Please advise.
SCANNERDANNERS REPLY:
Please email support@scannerdanner.com we can absolutely help you! This is a feedback page only. Thank you!
Stephen
Hi Man,
for time being I am very interesting on Automotive electrical part so if I join you will I get training and help on that will you provide me prints for various make and model or where I can buy
SCANNERDANNERS REPLY:
Service information (wiring diagrams and flow charts etc) are not provided as part of this training. The service information program I use (MitchellOnDemand) runs about $160 a month. I do have a DIY link that you guys can use that runs $20 for a months access for a single car https://eautorepair.adtrk.biz/?a=10817&c=10032&p=r&s1=
But as far as an SD Premium subscription goes, you will not find this type of training anywhere, especially for $11 a month. Pennies on the day my friend. Thanks for your interest!
for time being I am very interesting on Automotive electrical part so if I join you will I get training and help on that will you provide me prints for various make and model or where I can buy
SCANNERDANNERS REPLY:
Service information (wiring diagrams and flow charts etc) are not provided as part of this training. The service information program I use (MitchellOnDemand) runs about $160 a month. I do have a DIY link that you guys can use that runs $20 for a months access for a single car https://eautorepair.adtrk.biz/?a=10817&c=10032&p=r&s1=
But as far as an SD Premium subscription goes, you will not find this type of training anywhere, especially for $11 a month. Pennies on the day my friend. Thanks for your interest!
I will let me keep it short and simple I wish I knew exactly what you know and diagnosing electrical problems on cars I have seen many of your videos and the way you teach inspires me despite all the negative comments I might get from other people that seen me trying to fix my car At the moment I don’t have the Money to buy your book but when I do I Most definitely will I hope to learn many things from your work no doubt about it I am here to stay and Getting the same knowledge that you have because this is something that I am into as they say you will never work in your life if you do what you love
Menu is saying I am not a subscriber, hence I cant watch vids here. Will you please check to see what is wrong?
REPY FROM SCANNERDANNER:
Please email us at support@scannerdanner.com with your user name and email address that you registered with and we can help you. Thank you!
REPY FROM SCANNERDANNER:
Please email us at support@scannerdanner.com with your user name and email address that you registered with and we can help you. Thank you!
Paul, You guys are awesome. I do enjoy every lesson. Ill be leaving for a while whereas my wife is sick. But hope to be back to learn something else. You have taught me so much. GOD bless you guys.
I have been an auto mechanic for 3 years. I have been searching for something to help me gain a little more competitive edge in the industry and help me be worth more as a mechanic. I have been frustrated with the shop I work at and their way of "guessing" what the problem may be. I have only watched one video so far, and yet I am sure that this is the information I have been looking for. Paul gives excellent instruction and I have already learned a few things that will help me be more accurate and quick in my diagnostics. I'm very excited to continue. Feels good to be learning again.
I love the teaching method of attacking each problem from every single way possible. The more ways you can test a fault the better you are at finding oddball ones. I really enjoyed the videos on this channel.