Read/Leave Feedback
Welcome to the feedback page where you can post feedback and read feedback about ScannerDanners book and ScannerDanner Premium.
Paul, your book and videos give me a new Direction in my life what I want to do and what I want to work. At the moment I'm working in building but after when I buy your book and when I watching your videos I really want to became a professional in diagnostics.
life changing, Thanks.
life changing, Thanks.
Mr Paul you are really impacting thank you sir. I have been watching and learning from far Nigeria.How can I get certified at a low cost?
Not able to access product purchased more than twice. And the support reply is very slow. Not happy with product or service.
ScannerDanner's Reply:
Peter, you have a spam blocker in place that's preventing communication. For anyone else reading this, if you are using one of these, please add support@scannerdanner.com as a recognized contact BEFORE you contact me!
Peter, I can see that you purchase my eBook on 7-4-19 (just a single purchase) and then emailed me the next day asking for your eBook license code (which is automatically sent, after your purchase from bookguardpro and was probably blocked by your system as well). I promptly replied to your request on the same day with this information but my reply email was blocked by your system. I just attempted to email you again, today, after seeing this review, through my personal email and hopefully you will get that one. I have no problem with a refund of the eBook, as you state in this, that you are not happy with the product. As far as the lack of communication goes, this is something I take great pride in is helping my customers personally. To others reading this PLEASE ADD support@scannerdanner.com as a contact! These spam blockers are a HUGE frustration to me.
Last comment to Peter, I will make this right for you. Hopefully you will at least see my reply here and contact me again after approving my support email as a contact.
ScannerDanner's Reply:
Peter, you have a spam blocker in place that's preventing communication. For anyone else reading this, if you are using one of these, please add support@scannerdanner.com as a recognized contact BEFORE you contact me!
Peter, I can see that you purchase my eBook on 7-4-19 (just a single purchase) and then emailed me the next day asking for your eBook license code (which is automatically sent, after your purchase from bookguardpro and was probably blocked by your system as well). I promptly replied to your request on the same day with this information but my reply email was blocked by your system. I just attempted to email you again, today, after seeing this review, through my personal email and hopefully you will get that one. I have no problem with a refund of the eBook, as you state in this, that you are not happy with the product. As far as the lack of communication goes, this is something I take great pride in is helping my customers personally. To others reading this PLEASE ADD support@scannerdanner.com as a contact! These spam blockers are a HUGE frustration to me.
Last comment to Peter, I will make this right for you. Hopefully you will at least see my reply here and contact me again after approving my support email as a contact.
hello everyone, I felt compelled to leave some feedback here. I discovered paul around 3 years ago and and started to watch and learn, I felt like my eyes had been opened to a world which seemed beyond my reach (electrical diagnosis). since the time before "scanner danner" and now my wages have increased around £7 per hr which I mostly owe to paul and the confidence I gained from him although hard work and investment on my part. point being if you really commit to learn, this is the place to do it, it worked for me and I owe so much to paul. good luck to you all
Hi sir! I'm hasanal from the Philippines I'm your number one subscriber.. I'm very glad that your channel help me to understand some difficult and common problems of troubleshooting a car unit the latest and the oldest cars.. Somehow I have none of these scanners and meters to be used I can't afford.. But I'm very happy and satisfied a wonderful and nice explanation that easily catch up my learning capabity.. I wish that this channel will conteneusly exist and have a better way to provide to some that ignorant of this kind of technology... Thank you God bless...
Paul, thank you for putting together this valuable resource. This is satisfying my desire to learn, can't wait for school to start back up.
Perhaps it would be worthwhile to move the basic electric concepts to the very top of the listing of the premium videos as a starting point for those that need it or wish to review before jumping in. I know you mentioned in your introduction video on where to start that a subscriber withdrew because they felt the concepts were too advanced. They may not have watched your 'where to start video' or not noticed the basic electronic concepts. Repositioning will put it front and center for new joins that may benefit from the basic electric curriculum.
Perhaps it would be worthwhile to move the basic electric concepts to the very top of the listing of the premium videos as a starting point for those that need it or wish to review before jumping in. I know you mentioned in your introduction video on where to start that a subscriber withdrew because they felt the concepts were too advanced. They may not have watched your 'where to start video' or not noticed the basic electronic concepts. Repositioning will put it front and center for new joins that may benefit from the basic electric curriculum.
I have been studying Paul´s material for the last 6 months. My expertise level has gone from 5 to a 8 and I´m still learning and getting better every day. I have been working on cars since I was 14 but now its my main source of income, I do mobile diagnostics and repair.
He´s very good passing on his knowledge, though he rambles a bit at times jajajaja, in any case I am very grateful that he is out there helping anyone who wants to learn what he knows . With his teachings my diagnostics skills have increased my income and shortened diagnostics time.
Thanks Paul
He´s very good passing on his knowledge, though he rambles a bit at times jajajaja, in any case I am very grateful that he is out there helping anyone who wants to learn what he knows . With his teachings my diagnostics skills have increased my income and shortened diagnostics time.
Thanks Paul
Thank you for putting this together Mr. Danner. This is easily the best information I've found on modern auto systems and diagnostics. Its toned down enough to understand and straight to the point. I am re-watching your videos and I pick up new details every time - stuff you probably didn't even realize you were teaching us. Feels good to be back in school again - and I can't believe the value for the money.
I shake my head when I hear you have to tell your students to pay attention when I'd pay good money just to absorb what you have to say for an hour.
Thanks from NH
Ian Connolly
I shake my head when I hear you have to tell your students to pay attention when I'd pay good money just to absorb what you have to say for an hour.
Thanks from NH
Ian Connolly
Mr.Paul I appreciate your program. I am 19 currently enrolling in a Diesel Trade School. 2 Years on hands on experience and will be graduating this December. I finally enroll into your premium channel and bought your book. First thing I learn is omg there is a lot to learn from lol. I have proposed to go section by section and have you as a class with the premium channel. I appreciate your help and you been a great inspiration. I have worked with many guys and the question that I always had is how did you know that was the problem? The mechanical side many awnser me with the correct answer, but on the electrical diagnostic side the 100% answer was idk. I soon realize that many of them were parts changers. The worse decision I considered I can ever make is guessing and not knowing what you actually are working on. I don't want to be a parts changer. That is the reason I always try learning something from your videos I can actually fix the problem correctly. I hate parts changer. Here in Marshall Tx in East Texas that is what it consist of. Im glad we have internet now bc without I wouldn't find you. Thank Mr.Danner ill be enroll in your premium for a good while. You are a true mentor. Sincerely_ Jose Julian Serrano
The book is fantastic, fully loaded and a Blessing to the automobile repair industry, my only issue is that I can only get access to the premium channel video's only when I am either in America or Canada, no access from my home country Nigeria. How can your support guys help?.
Thanks
Thanks